HomeMotor / EngineDichtungen / GasketsAthena Kopfdichtung MLS für Nissan Primera / Almera / Serana / Sunny / Infiniti G20 / SR20DE 0.85mm 88.5mm 338150R

Athena Kopfdichtung MLS für Nissan Primera / Almera / Serana / Sunny / Infiniti G20 / SR20DE 0.85mm 88.5mm 338150R

133,66 

Lieferzeit: 3-7 Werktage

Auf Lager

In den Warenkorb
Art.-Nr.: 338150R Categories : , Marke:

Beschreibung

ATHENA (MLS) Multi Layer Gasket

Material

ATHENA MLS gaskets feature a combination of 3 to 5 layers made of different types of raw materials.

Outer and inner layers combination is designed to perform at higher compression levels than stock configuration and type of steels that are used may vary upon the engine requirements.

Athena MLS gaskets provide an even torque load across the sealing surface to compensate any type of bore distortion.

Athena MLS gasket is the best solution for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks.

Manufacturing Process

Athena New Design MLS Head Gaskets are made from high grade 301 stainless steel full hard material.

Each layer is individually formed using a state-of-the-art laser cutting and embossed with an optimized formation process.

2 head gasket layers go through a stress relieving process to significantly reduce embossment forming induced stress.

Proprietary two-part polymer coating is applied after the stress relieving process and ensures uniform coverage of the outer layers providing no break in the coating.This process ensures the micro seal of engine coolant/oil fluids.

Athena MLS gaskets are tested and analyzed on Engine Dynos and endurance performances.

Gas Stopper Technology

Gas stopper technology is a key design factor of racing MLS head gaskets. The stainless-steel stopper layer features a state of the art “active fold”. which delivers a high-pressure seal around the cylinder bore when tightening the cylinder head. Gas stopper is located around the combustion chamber. allowing cylinder head and engine block to clamp tighter and preventing gases to leak out of the combustion chamber.

This also avoids component distortion by means of a quicker equalization of the various components’ temperature.

Benefits

Superior sealing properties under high pressure conditions

Higher elasticity and constant load resistance

Optimized load balance

Improved engine performance

Longer durability

Proprietary Coating Technology

Our two-part polymer coating is applied after the stress relieving process and ensures uniform coverage of the outer layers providing no break in the coating. This process ensures the micro seal of engine coolant/oil fluids and meets the demands of a variety of harsh environments.

The first layer is a high temperature compound that will conform to fill engine block deck surface and cylinder head surface irregularities. (Typical MLS head gaskets require a surface finish of 30 Ra. while Athena’s will seal surface finishes up to 60 Ra).

The second layer itself releases easily and will not stick to mating surfaces when disassembling the engine.”

Fits to :

INFINITI G202.0 1998cc 85kw
INFINITI SR20DE 1998cc 85kw
NISSAN 100NX (B13)2.0 GTI 1998cc 105kw
NISSAN 200SX Coupe (S14) | SILVIA2.0 i 16V 1998cc 118kw
NISSAN ALMERA I (N15)2.0 1998cc 92kw
NISSAN ALMERA I Hatchback (N15)2.0 GTi 1998cc 105kw
NISSAN ALMERA TINO (V10)2.0 1998cc 100kw
NISSAN PRIMERA (P10)2.0 1998cc 96kw
NISSAN PRIMERA (P10)2.0 16V 1998cc 85kw
NISSAN PRIMERA (P10)2.0 16V 4×4 1998cc 85kw
NISSAN PRIMERA (P10)2.0 4×4 1998cc 110kw
NISSAN PRIMERA (P10)2.0 GT 1998cc 110kw
NISSAN PRIMERA (P10)2.0 i 1998cc 92kw
NISSAN PRIMERA (P11)2.0 16V 1998cc 96kw
NISSAN PRIMERA (P11)2.0 16V 1998cc 105kw
NISSAN PRIMERA (P11)2.0 16V 1998cc 103kw
NISSAN PRIMERA (P11)2.0 16V 1998cc 110kw
NISSAN PRIMERA (P11)2.0 16V 1998cc 85kw
NISSAN PRIMERA Hatchback (P10)2.0 1998cc 110kw
NISSAN PRIMERA Hatchback (P10)2.0 16V 1998cc 85kw
NISSAN PRIMERA Hatchback (P10)2.0 16V 4×4 1998cc 85kw
NISSAN PRIMERA Hatchback (P10)2.0 i 1998cc 92kw
NISSAN PRIMERA Hatchback (P11)2.0 16V 1998cc 110kw
NISSAN PRIMERA Hatchback (P11)2.0 16V 1998cc 103kw
NISSAN PRIMERA Hatchback (P11)2.0 16V 1998cc 96kw
NISSAN PRIMERA Hatchback (P11)2.0 16V 1998cc 85kw
NISSAN PRIMERA Traveller (W10)2.0 i 1998cc 85kw
NISSAN PRIMERA Traveller (WP11)2.0 16V 1998cc 103kw
NISSAN PRIMERA Traveller (WP11)2.0 16V 1998cc 96kw
NISSAN PRIMERA Traveller (WP11)2.0 16V 1998cc 85kw
NISSAN SERENA (C23) | LARGO2.0 1998cc 93kw
NISSAN SR20DE 1998cc 85kw
NISSAN SR20DEH 1998cc 92kw
NISSAN SR20DEL 1998cc 85kw
NISSAN SR20DET 1998cc 147kw
NISSAN SR20DI 1998cc 85kw
NISSAN SUNNY III Hatchback (N14)2.0 GTI 16V 1998cc 105kw
NISSAN SUNNY III Hatchback (N14)2.0 GTI-R 4×4 1998cc 162kw
NISSAN SUNNY III Liftback (N14)2.0 i 16V 1998cc 105kw
NISSAN SUNNY IV Saloon (N16)2.0 1998cc 92kw

Zusätzliche Informationen

Gewicht 1,0 kg

Rezensionen

Es gibt noch keine Rezensionen.

Schreibe die erste Rezension für „Athena Kopfdichtung MLS für Nissan Primera / Almera / Serana / Sunny / Infiniti G20 / SR20DE 0.85mm 88.5mm 338150R“

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

Sie erreichen uns telefonisch unter

+49163-7989487

E-Mail: info@pro-garage.com

Banküberweisung & PayPal

Copyright © 2026 ProGarage. Alle Rechte vorbehalten.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Bild
  • Art.-Nr.
  • Bewertung
  • Preis
  • Lagerstatus
  • Verfügbarkeit
  • In den Warenkorb
  • Beschreibung
  • Content
  • Gewicht
  • Maße
  • Zusätzliche Informationen
Click outside to hide the comparison bar
Vergleichen
Startseite
Einkaufen
Wunschliste
Konto