Beschreibung
CP Bullet Pistons – XR6 Barra
Rated at up to 1000hp
- Bore sizes: +0.5mm (20 thou), +0.25mm (10 thou), and STD
- Comp ratio: 9.0:1, 10:1, 12:1
- 2618 Forged Alloy
- Offset gudgeon pin
- 4 Valve Pockets
The major features of CP’s Bullet pistons are:
- Pistons manufactured from 2618 alloy for strength and durability
- Balanced to + or – 1 gram
- Dual forced pin oilers
- Contact reduction grooves
- Accumulator Grooves
- High grade Gas Nitride rings
- Forged side relief
- Chromoly wrist pins with wire locks
- FEA designed forging
- Tight tolerances
- USA made
Please Note:
Prices vary depending on the number of changes CP needs make to achive the Spool Imports special requitements. CP Carrillo only list .010″ and .020″ 9:1 pistons for the Ford XR6 Barra.
10:1 and 12:1 are only available in stock in +.025mm (.010″) other sizes can be special ordered but will take 5-7 weeks and may incurr an additional fee.
STD bore size pistons are not recommended in a used bore for any performance engine unless the bores have done minimal work with minimal wear and the correct piston to bore clearance can be adhered to.
All piston manufacturers have a specific piston to bore clearance that they recommend. If STD bore pistons are requested and there is a piston to bore clearance issue we will not exchange or refund, due to the reasons given above.
Zusätzliche Informationen
| Gewicht | 5,000000 kg |
|---|
